BKRBX - SULFUR MOLTEN
- MSDS: BKRBX
- Manufacturer: CHEMICAL RESEARCH PRODUCTS CO INC
- Product Name: SULFUR MOLTEN
- National Stock Number: 6810-00-282-9709
Product Identification
Product ID:SULFUR MOLTEN
MSDS Date:03/04/1986
FSC:6810
NIIN:00-282-9709
MSDS Number: BKRBX
Responsible Party
CHESAPEAKE, VA 23323
US
Emergency Phone: 804-485-1155/FAX 804-485-1111
Info Phone: 804-485-1155/FAX 804-485-1111
Cage: 62799
Contractor
Telephone: 804-485-1155
Cage: 62799
Ingredients
SULFUR
CAS: 7704-34-9
RTECS: WS4250000
Fraction By Weight: 100%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE-SKIN:MAY CAUSE THERMAL
BURNS.HYDROGEN SULFIDE MAY BE PRESENT/GENERATED.CAN PARALYZE THE
RESPIRATORY SYSTEM RAPIDLY CAUSING UNCONSCIOUSNESS & DEATH.SINCE
HYDROGEN SULFIDE DEADENS THE SENSE OF SME LL,DO NOT RELY ON ODOR
FOR WARNING.SWALLOWED:DUE TO THE PHYSICAL FORM OF THIS MATERIAL, IT
IS UNLIKELY.CHRONIC-NOT GIVEN
Effects of Overexposure:SEE HEALTH HAZARDS SECTION.
Medical Cond Aggravated by Exposure:NOT GIVEN.
First Aid
First Aid:GET MEDICAL ATTENTION.SKIN:FLUSH WITH COLD WATER.EYES:FLUSH
WITH LARGE AMOUNT OF WATER,KEEPING EYELIDS OPEN.INHALED:REMOVE TO
FRESH AIR.GIVE CPR/OXYGEN IF NEEDED.KEEP PERSON WARM & QUIET.
Fire Fighting
Flash Point:370F,188C
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, OR SAND
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. EVACUATE AREA. COOL
FIRE EXPOSED CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:WHEN DISPERSED IN AIR,CAN BE HIGHLY
FLAMMABLE & MAY CAUSE FLASH FIRES OR IGNITE EXPLOSIVELY IF EXPOSED
TO IGNITION SOURCES.MAY CONTAIN HYDROGEN SULFIDE.
Accidental Release
Spill Release Procedures:SMALL SPILLS: SWEEP UP MATERIAL FOR DISPOSAL
OR RECOVERY. LARGE SPILL: SHOVEL MATERIAL INTO CONTAINERS.
THOROUGHLY SWEEP AREA OF SPILL TO CLEAN UP ANY RESIDUAL MATERIAL.
Handling
Handling and Storage Precautions:STORAGE-CONTAINERS OF THIS MATERIAL
MAY BE HAZARDOUS WHEN EMPTIED.SINCE EMPTIED CONTAINERS RETAIN
PRODUCT RESIDUES.
Other Precautions:OBSERVE ALL HAZARD PRECAUTIONS GIVEN IN THIS DATA
SHEET FOR EMPTY CONTAINERS.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED AIR SUPPLIED RESPIRATOR
IF EXPOSURES EXCEED THE OSHA LIMIT.
Ventilation:PROVIDE SUFFICIENT MECHANICAL (GENERAL AND/OR LOCAL
EXHAUST) VENTILATION TO MAINTAIN EXPOSURE BELOW TLV.
Protective Gloves:LEATHER GLOVES
Eye Protection:CHEMICAL SPLASH GOGGLES & FACESHIELD(8")
Other Protective Equipment:IMPERVIOUS CLOTHING AND BOOTS
Work Hygienic Practices:WASH THOROUGHLY BEFORE EATING OR SMOKING.
LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
Chemical Properties
HCC:F8
Boiling Pt:B.P. Text:832F,444C
Vapor Pres:<0.01
Vapor Density:>1
Spec Gravity:1.790
Appearance and Odor:NOT GIVEN
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG BASES
Stability Condition to Avoid:HIGH HEAT, OPEN FLAMES AND OTHER SOURCES
OF IGNITION
Hazardous Decomposition Products:TOXIC MATERIALS: SULFUR COMPOUNDS,
HYDROGEN SULFIDE, ETC.
Disposal
Waste Disposal Methods:DEPOSIT IN A LANDFILL IN ACCORDANCE WITH
FEDERAL, STATE & LOCAL LAWS AND REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.